120x50x2400 Blank Forks

120x50x2400 Blank Forks weigh 132kg each. The cross-section is 120 mm wide, 50 mm thick, and the total length is 2.4 meters. The blank fork is directly rolled from a continuous casting billet without any heat treatment or straightening, allowing natural bending within 4 mm of the total length and torsion within 30 mm of the end. The surface of each 132-kg billet is covered with complete hot-rolled oxide scale. The thickness of the oxide scale is 0.1 to 0.3 mm. It has a certain anti-rust ability and can be stored in a normal warehouse environment for more than one year. The fork tips retain rolled fillets without chamfering or beveling. Users can cut any shape according to actual needs. There is an embossed steel code on each end of the fork surface, including heat number, batch number and weight information.

 

 

The characters are about 1 mm deep and can be retained or removed during subsequent processing. The material is ordinary Q355B carbon steel, and a certificate of composition and mechanical properties is provided for each batch. The packaging is bundled with a set of six steel straps, with square wood padding at the bottom, and is hoisted as a whole. A single load of 132kg requires the use of a forklift or crane for stacking, and single person handling is prohibited. This specification is mainly intended for the spot inventory of large steel structure processing enterprises, heavy machinery maintenance workshops and steel traders, and is used as a general profile for temporary support beams, welding tooling bases or heavy equipment bases.

 

 

 

 

 

 

 

 

 

 

 

 

 

Etiquetes populars: 120x50x2400 blank forks, China 120x50x2400 blank forks manufacturers, suppliers, factory